XVID2. Analog video system of 2.4Ghz for XLRS systems, ranges from 15Km to 100km.


XVID2. Analog video system of 2.4Ghz for XLRS systems, ranges from 15Km to 100km.

Product no.: XLRSVID

In stock
can be shipped within 7-10 days

Starting from 616.00
Price without VAT or delivery


Possible delivery methods: Pick up in DMD factory, DHL Express

 

Analog video system for Drones or UAVS, also valid for use in other types of vehicles.

Ranges from 15Km to 100Km or more according to modules, antennas and conditions.

 

Different ranges depending on the final configuration (approximate ranges):

 

TRANSMISOR VÍDEO + OSD

XOSDV2

XOSDV2_02w XOSDV2_ScreenObjects 

XOSDV2 is compact and has integrated 2.4Ghz 500mW transmitter and OSD(On Screen Display), that presents graphs, icons and texts W/B on screen oriented mainly for the visualization of the instruments of an aircraft and of flight data in airplanes, helicopters and radio control FPV systems, UAV, robots, surveillance, etc.

The RMD1, RXD2, RXD3 or RXLRS receivers can be connected to XOSDV2 through the RCBus port by providing XLRS radio data (RSSI RX, RSSI TEL, Quantity RC packets, RF noise, Real-time Km calculation, etc.), XOSD it presents them on the screen as text objects or graphics, superimposing them on analog video.

 

It also interprets Mavlink data packets from a Pixhawk autopilot or autopilots compatible with Mavlink protocol, connects to the autopilot telemetry port at 38400baud and shows on screen (GPS, Altitude, Speed, Flight mode, Flight time, Artificial Horizon, etc.). 

 

  • CHARACTERISTICS:
    • 4 RC Channels: Auxiliary servos with mixes.
    • 1 Input: Mavlink Telemetry.
    • 2 Camera Inputs: PAL video (Can be powered at 5 or 12V).
    • 2 RCBUS Input. (TTL Data): Serial communications with RX XLRS and other XLRS devices.
    • 1 Red Led: Video Synchronization.
    • 1 Blue Led: Camera 1.
    • 1 Blue Led: Camera 2.
    • Resolution: 42 characters x 32 lines.
    • Instruments/Objects: 50.
    • 3 Configurable pages.
    • Micro Fan: Dispels the heat of video TX.
    • Internal Microphone: with audio preamp and volume control.
    • Voltmeter of 5V.
    • Temperature sensor.
  • VIDEO TRANSMITTER:
    • Maximum Range: 30-40Km (Depending antennas on TX and RX). For more range 80-100Km you can use BOOST24G4W (Video Booster 2.4Ghz 4W).
    • Frequency: 2.4Ghz.
    • Power: 500mW.
    • Channels: 8.
    • Channels selection: CH1: 2414Mhz, CH2: 2432Mhz, CH3: 2450Mhz, CH4: 2468Mhz, CH5: 2490Mhz, CH6: 2510Mhz, CH7: 2390Mhz, CH8: 2370Mhz.
    • Working temperature: 10ºC ~ + 85ºC (measured in the XOSD CPU).
    • Ambient Temperature: -10ºC to 50ºC.
       
  • GENERAL:
    • Dimensions: 58.50 X 35.70 X 21.5mm.
    • Maximum height and support: 70.60 X 35.70 X 21.50mm.
    • Support holes: 4 holes of M2.5.
    • Weight: 41g approx.
    • Configurable and upgradeable: Yes with DMDStudio.
  • More information click here, Technical Characteristics XOSD.

 

VIDEO RECEIVER

RXVIDV2-24

RXVID_001 

RXVIDV2-24 has 2 receivers of analog video to 2.4Ghz, 8 channels in diversity mode and internal transmitter of 5.8Ghz to use it in wireless mode without cables with one or several video glasses with 5.8Ghz receiver or with video monitor.

Internal battery of long duration, 5h. Option double duration up to 10h (BATTXLRS-48) or (BATTXLRS-72).

Diversity makes that we have two antenna inputs and that the best possible reception is selected internally. Then it is possible to have a directional antenna to obtain more range and an omnidirectional antenna for nearby (1-2km approx.) flights.

 

  • CHARACTERISTICS:
    • 2 Receivers: Analog video of 8 channels at 2.4Ghz.
    • 1 Transmitter: Analog video of 8 channels at 5.8Ghz, 10mW.
    • 1 Bluetooth.
    • 1 OLED display.
    • 1 Buzzer or acoustic warning.
    • 1 Encoder with push button.
    • 1 Switch: ON / OFF.
    • 1 Red LED: RF Receiver 1.
    • 1 Red LED: RF Receiver 2.
    • 1 Blue LED: Bluetooth.
    • 1 Red LED: Charger.
    • 2 Video receiver antennas connectors: SMA Female.
    • 2 Audio / Video outputs: With stereo jack with independent buffers.
    • 1 RCBUS: Serial communications with XPAD or GCSD4 and other XLRS devices.
    • 1 Micro USB connector: To charge and configure.
    • Box: Robust finished in aluminum, plastic and methacrylate with 4 holes for support.
  • VIDEO RECEIVER:
    • 2 Receivers: Diversity Mode. 
    • Frequency: 2.4Ghz.
    • Sensitivity: -85dBm.
    • Channels: 8
    • Channels selection: CH1: 2414Mhz, CH2: 2432Mhz, CH3: 2450Mhz, CH4: 2468Mhz, CH5: 2490Mhz, CH6: 2510Mhz, CH7: 2390Mhz, CH8: 2370Mhz.
  • VIDEO TRANSMITTER:
    • Range: 15-25m.
    • Frequency: 5.8Ghz.
    • Power: 10mW (+ 10dBm).
    • Channels: 8.
    • Channels selection: CH1: 5733Mhz, CH2: 5752Mhz, CH3: 5771Mhz, CH4: 5790Mhz, CH5: 5809Mhz, CH6: 5828Mhz, CH7: 5847Mhz, CH8: 5866Mhz.

 

VIDEO BOOSTER

BOOST24G4W

BOOST24G4W-0007_35w  

BOOST24G4W, is a video booster 2.4Ghz 4W exclusively designed to increase the video range in XOSDV2 transmitters (or similar XOSD models).

Ranges from 80 to 100Km with an omnidirectional 5dBi antenna on the plane or Drone and 24dBi (ANT24G24DB) on the ground.

Improve the power of your XOSD2 from 0.5W (+ 27dBm) to 4W (+ 36dBm).

Attention: It isn't valid for Wifi. Before using BOOST24G4W, check the regulations of your country.

 

  • CHARACTERISTICS:
    • Voltage: 12V. Min 10,8V. Max 13,5Vcc.
    • Direct power: with LiPo of 3 cells / 11,1V, or power from a DCDC ajusted to 12Vdc/2A.
    • Consumption: Stand by 250mA. Active @12V, @4W(RF) 1,43A. 
    • 1 Blue Led: Stand by.
    • 1 Green Led: Activated Booster.
    • 1 Input: TX input (SMA-Female), max. input power 500mW(+27dBm).
    • 1 Output: Antenna output (SMA-Female).
  • VIDEO BOOSTER:
    • Maximum Range: 80-100Km, with 5dBi omnidirectional antenna on Plane/Drone and 24dBi on the ground.
    • Frequency: 2.4Ghz.
    • Frequency Range: 2370-2510Mhz.
    • Power: 4W. 
    • Working Temperature: Top 42ºC, Bottom 51ºC.
    • Ambient Temperature: -10ºC to 45ºC.

 

ANTENNAS

ANTPLA24G17DB

ANTPLA24G17DB

 

ANT24G24DB

ANT2424B

 

ANTGSM24

ANTGSM900

 

DATASHEET:

  • XOSD_Datasheet  RXVID_Datasheet  BOOST24G4W_Datasheet_mini_1

 

ONLINE MANUALS AND INFORMATION

 

VIDEO

  • Aplicación

  •  

    Aplicación

CONTENT

  • Video Transmitter + OSD: 
    • 1-XOSDV2. OSD + Video TX 2.4Ghz 500mW.
  • Video Receiver:
  • Video Booster: 
  • Antennas: ​​
  • Accessories:
    • 1- LAT1M_SMAH/SMAM. Cable SMA-Female to SMA-Male, 500mm. 
    • 1- LAT2MSMAFNM. Cable SMA-Male to Connector N-male, 300mm.
    • 1- LAT15_SMAH/MMCXM. Cable SMA-Female to MMCX-Male, 150mm. 
    • 1- CABLE_PX4_XOSD. Cable Pixhawk for XOSD. 
    • 1- CABLE_SERVO_HH. Cable Servo RC Female to Female.  
    • 1- CABLE_USB/MICROUSB. Cable USB-A Male to Micro USB-B Male, 2m.
    • 1- CABLE_JRCACable Audio Stereo MiniJack 3.5M to RCA Male.
    • 1- CSMAH/SMAM. Connector SMA-Female to SMA-Male. (Optional, only if you have selected BOOST24G4W).
    • 1- Jumpers.
    • 1- Fuse 2A.
    • 1- Suitcase key.

 

* The images shown on this page are only referential and may differ from the final products.

* This page shows the description of all products and options that can be selected in the XVID2, the contents of the Kit will vary depending on the options selected.

* Note: Tripod not included.

 

We also recommend

*
Prices without VAT or delivery

Customers who bought this product also bought

*
Prices without VAT or delivery

Browse this category: Video Systems