XVID3. Analog video system long range.

Product no.: XVID3-0001

At this time the product isn't available. If you need more information, please contact us dmd@dmd.es.

Price without VAT or delivery
Possible delivery methods: Pick up in DMD factory, DHL Express

Product obsolete. 

New version 3 available here: XVID3B-2G4.


With XVID3 video, you can reach 100Km or more, depending on configurations.

XVID3 is the 3rd generation of the XVID analog video systems, the video modules have hardware improvements compared to the previous versions.

The transmitter and video receiver work in 2.4Ghz (1.2Ghz, 1.3Ghz optional). The receiver has a built-in transmitter of 5.8Ghz 10mW (repeater), for use in wireless mode (without cables) with one or several video glasses, video monitors, etc., which have a 5.8Ghz receiver. It also has two audio/video outputs by cable.

Instrument display as an F16: XLRS radio link, speed, height, GPS, heading, flight mode, alarms, batteries status, XLRS telemetry, Mavlink telemetry and much more.

Partners: Custom XVID3 systems on demand (Consult).


Different ranges depending on the final configuration (approximate ranges):




XOSD3W1-0001_30w XOSDV2_ScreenObjects 

XOSD3W1 is compact and has integrated 2.4Ghz 1000mW transmitter and OSD(On Screen Display), that presents graphs, icons and texts W/B on screen oriented mainly for the visualization of the instruments of an aircraft and of flight data in airplanes, helicopters and radio control FPV systems, UAV, robots, surveillance, etc.

The RMD1, RXD2, RXD3 or RXLRS receivers can be connected to XOSDV2 through the RCBus port by providing XLRS radio data (RSSI RX, RSSI TEL, Quantity RC packets, RF noise, Real-time Km calculation, etc.), XOSD it presents them on the screen as text objects or graphics, superimposing them on analog video.

It also interprets Mavlink data packets from a Pixhawk autopilot or autopilots compatible with Mavlink protocol, connects to the autopilot telemetry port at 38400baud and shows on screen (GPS, Altitude, Speed, Flight mode, Flight time, Artificial Horizon, etc.). 

Attention: Before using XOSD3W1, check the regulations of your country. Not for use in UE.


    • 4 RC Channels: Auxiliary servos with mixes.
    • 1 Input: Mavlink Telemetry.
    • 2 Camera Inputs: PAL video (Can be powered at 5 or 12V).
    • 2 RCBUS Input. (TTL Data): Serial communications with RX XLRS and other XLRS devices.
    • 1 Red Led: Video Synchronization.
    • 1 Blue Led: Camera 1.
    • 1 Blue Led: Camera 2.
    • Resolution: 42 characters x 32 lines.
    • Instruments/Objects: 50.
    • 3 Configurable pages.
    • Micro Fan: Dispels the heat of video TX.
    • Internal Microphone: with audio preamp and volume control.
    • Voltmeter of 5V.
    • Temperature sensor.
    • Maximum Range: 100Km or more according configurations.
    • Frequency: 2.4Ghz.
    • Power: 1000mW. (Optional: Possibility of adding an attenuator to lower output power for example: 100mW(20dBm) (Consult ar dmd@dmd.es)).
    • Channels: 8.
    • Channels selection: CH1: 2414Mhz, CH2: 2432Mhz, CH3: 2450Mhz, CH4: 2468Mhz, CH5: 2490Mhz, CH6: 2510Mhz, CH7: 2390Mhz, CH8: 2370Mhz.
    • Working temperature: 10ºC ~ + 85ºC (measured in the XOSD CPU).
    • Ambient Temperature: -10ºC to 50ºC.
    • Dimensions: 82,25 X 26,85 X 33,25mm.
    • Support holes: 4 holes of M2.5.
    • Weight: 58g.
    • Configurable and upgradeable: Yes with DMDStudio.

More information click here, Technical Characteristics XOSD3W1.





RXVID3 with two simultaneous 2.4Ghz receivers in diversity mode and 5.8Ghz repeater of 10mW to use it in wireless mode (without cables) with one or more video glasses or video monitors with 5.8Ghz receiver.

The 2.4Ghz diversity has two antenna inputs and internally selects the best possible receiver. You can install in the receiver 1, a directional antenna for long range and in receiver 2 an omnidirectional antenna for nearby flights.

Attention: Before using RXVID3, check the regulations of your country. Not for use in UE.


    • 2 Receivers: Analog video of 8 channels at 2.4Ghz.
    • 1 Transmitter: Analog video of 8 channels at 5.8Ghz, 10mW.
    • 1 Bluetooth.
    • 1 OLED display.
    • 1 Buzzer or acoustic warning.
    • 1 Encoder with push button.
    • 1 Switch: ON / OFF.
    • 1 Red LED: RF Transmitter 1.
    • 1 Red LED: RF Receiver 1.
    • 1 Red LED: RF Receiver 2.
    • 1 Blue LED: Bluetooth.
    • 1 Red LED: Charger.
    • 3 Video receiver antennas connectors: SMA-Female.
    • 2 Audio / Video outputs: With stereo jack with independent buffers.
    • 1 RCBUS: Serial communications with XLRS transmitters and other XLRS devices.
    • 1 Micro USB connector: To charge and configure.
    • Box: Robust finished in aluminum, plastic and methacrylate with 4 holes for support.
    • 2 Receivers: Diversity Mode. 
    • Frequency: 2.4Ghz.
    • Sensitivity: -95dBm.
    • Channels: 8
    • Channels selection: CH1: 2414Mhz, CH2: 2432Mhz, CH3: 2450Mhz, CH4: 2468Mhz, CH5: 2490Mhz, CH6: 2510Mhz, CH7: 2390Mhz, CH8: 2370Mhz.
    • Range: 50-100m or more according antenna.
    • Frequency: 5.8Ghz.
    • Power: 10mW (+ 10dBm).
    • Channels: 8.
    • Channels selection: CH1: 5733Mhz, CH2: 5752Mhz, CH3: 5771Mhz, CH4: 5790Mhz, CH5: 5809Mhz, CH6: 5828Mhz, CH7: 5847Mhz, CH8: 5866Mhz.
  • ​​GENERAL:
    • Dimensions: 96 X 90 X 41mm.
    • Weight: 335g.
    • Working temperature: -10º to 55ºC.
    • Configurable and updatable: Yes, with DMDStudio.

More information click here, Technical Characteristics RXVID3.













  • XVID3_Datasheet_01_miniW8  





  • Aplicación



  • Aplicación



  • Video Transmitter + OSD: 
    • 1- XOSD3W1. OSD + Video TX 2.4Ghz 1000mW.
  • Video Receiver:
    • 1- RXVID3. 2-RX 2.4Ghz, 8CH, TX 5.8Ghz 10mW.
  • Antennas: ​​
  • Accessories:
    • 1- LAT1M_SMAH/SMAM. Cable SMA-Female to SMA-Male, 500mm. 
    • 1- LAT2MSMAFNM. Cable SMA-Male to Connector N-male, 300mm.
    • 1- LAT15_SMAH/MMCXM. Cable SMA-Female to MMCX-Male, 150mm. 
    • 1- CABLE_PX4_XOSD. Cable Pixhawk for XOSD. 
    • 1- CABLE_SERVO_HH. Cable Servo RC Female to Female.  
    • 1- CABLE_USB/MICROUSB. Cable USB-A Male to Micro USB-B Male, 2m.
    • 1- CABLE_JRCACable Audio Stereo MiniJack 3.5M to RCA Male.
    • 1- Jumpers.
    • 1- Fuse 2A.
    • 1- Suitcase key.



* The images shown on this page are only referential and may differ from the final products.

* This page shows the description of all products and options that can be selected in the XVID2, the contents of the Kit will vary depending on the options selected.

* Tripod not included.

Analog video systems with powers greater than 25 or 100mW at 2.4Ghz, shouldn't be used in Europe, except authorized users. For governmental or military use, depending on the country, you can use frequencies of 1.2 or 1.3Ghz, consult.


Additional product information

Antenna Video Receiver By default ANTPLA24G17DB. Antenna Planar 2.4Ghz 17dBi .

We also recommend

Prices without VAT or delivery

Browse this category: PRODUCTS