XVID2. Analog video system of 2.4Ghz for XLRS systems, ranges from 15Km to 100km.

Product no.: XVID2-0001

The product is not available. If you need more information, please contact us dmd@dmd.es.

Price without VAT or delivery
Possible delivery methods: Pick up in DMD factory, DHL Express


Analog video system for Drones or UAVS, also valid for use in other types of vehicles.

Ranges from 15Km to 100Km or more according to modules, antennas and conditions.


Different ranges depending on the final configuration (approximate ranges):




XOSDV2_02w XOSDV2_ScreenObjects 

XOSDV2 is compact and has integrated 2.4Ghz 500mW transmitter and OSD(On Screen Display), that presents graphs, icons and texts W/B on screen oriented mainly for the visualization of the instruments of an aircraft and of flight data in airplanes, helicopters and radio control FPV systems, UAV, robots, surveillance, etc.

The RMD1, RXD2, RXD3 or RXLRS receivers can be connected to XOSDV2 through the RCBus port by providing XLRS radio data (RSSI RX, RSSI TEL, Quantity RC packets, RF noise, Real-time Km calculation, etc.), XOSD it presents them on the screen as text objects or graphics, superimposing them on analog video.


It also interprets Mavlink data packets from a Pixhawk autopilot or autopilots compatible with Mavlink protocol, connects to the autopilot telemetry port at 38400baud and shows on screen (GPS, Altitude, Speed, Flight mode, Flight time, Artificial Horizon, etc.). 

Attention: Before using XOSDV2, check the regulations of your country. Not for use in UE.


    • 4 RC Channels: Auxiliary servos with mixes.
    • 1 Input: Mavlink Telemetry.
    • 2 Camera Inputs: PAL video (Can be powered at 5 or 12V).
    • 2 RCBUS Input. (TTL Data): Serial communications with RX XLRS and other XLRS devices.
    • 1 Red Led: Video Synchronization.
    • 1 Blue Led: Camera 1.
    • 1 Blue Led: Camera 2.
    • Resolution: 42 characters x 32 lines.
    • Instruments/Objects: 50.
    • 3 Configurable pages.
    • Micro Fan: Dispels the heat of video TX.
    • Internal Microphone: with audio preamp and volume control.
    • Voltmeter of 5V.
    • Temperature sensor.
    • Maximum Range: 30-40Km (Depending antennas on TX and RX). For more range 80-100Km you can use BOOST24G4W (Video Booster 2.4Ghz 4W).
    • Frequency: 2.4Ghz.
    • Power: 500mW.
    • Channels: 8.
    • Channels selection: CH1: 2414Mhz, CH2: 2432Mhz, CH3: 2450Mhz, CH4: 2468Mhz, CH5: 2490Mhz, CH6: 2510Mhz, CH7: 2390Mhz, CH8: 2370Mhz.
    • Working temperature: 10ºC ~ + 85ºC (measured in the XOSD CPU).
    • Ambient Temperature: -10ºC to 50ºC.
    • Dimensions: 58.50 X 35.70 X 21.5mm.
    • Maximum height and support: 70.60 X 35.70 X 21.50mm.
    • Support holes: 4 holes of M2.5.
    • Weight: 41g approx.
    • Configurable and upgradeable: Yes with DMDStudio.
  • More information click here, Technical Characteristics XOSD.





RXVIDV2-24 has 2 receivers of analog video to 2.4Ghz, 8 channels in diversity mode and internal transmitter of 5.8Ghz to use it in wireless mode without cables with one or several video glasses with 5.8Ghz receiver or with video monitor.

Internal battery of long duration, 5h. Option double duration up to 10h (BATTXLRS-48) or (BATTXLRS-72).

Diversity makes that we have two antenna inputs and that the best possible reception is selected internally. Then it is possible to have a directional antenna to obtain more range and an omnidirectional antenna for nearby (1-2km approx.) flights.

Attention: Before using RXVID2, check the regulations of your country. Not for use in UE.


    • 2 Receivers: Analog video of 8 channels at 2.4Ghz.
    • 1 Transmitter: Analog video of 8 channels at 5.8Ghz, 10mW.
    • 1 Bluetooth.
    • 1 OLED display.
    • 1 Buzzer or acoustic warning.
    • 1 Encoder with push button.
    • 1 Switch: ON / OFF.
    • 1 Red LED: RF Receiver 1.
    • 1 Red LED: RF Receiver 2.
    • 1 Blue LED: Bluetooth.
    • 1 Red LED: Charger.
    • 2 Video receiver antennas connectors: SMA Female.
    • 2 Audio / Video outputs: With stereo jack with independent buffers.
    • 1 RCBUS: Serial communications with XPAD or GCSD4 and other XLRS devices.
    • 1 Micro USB connector: To charge and configure.
    • Box: Robust finished in aluminum, plastic and methacrylate with 4 holes for support.
    • 2 Receivers: Diversity Mode. 
    • Frequency: 2.4Ghz.
    • Sensitivity: -85dBm.
    • Channels: 8
    • Channels selection: CH1: 2414Mhz, CH2: 2432Mhz, CH3: 2450Mhz, CH4: 2468Mhz, CH5: 2490Mhz, CH6: 2510Mhz, CH7: 2390Mhz, CH8: 2370Mhz.
    • Range: 15-25m.
    • Frequency: 5.8Ghz.
    • Power: 10mW (+ 10dBm).
    • Channels: 8.
    • Channels selection: CH1: 5733Mhz, CH2: 5752Mhz, CH3: 5771Mhz, CH4: 5790Mhz, CH5: 5809Mhz, CH6: 5828Mhz, CH7: 5847Mhz, CH8: 5866Mhz.





BOOST24G4W, obsolete product: it is replaced by the news video transmitters XOSD of 1W or 2W, (In preparation, available from January-February), for more information send an email to dmd@dmd.es.

BOOST24G4W, is a video booster 2.4Ghz 4W exclusively designed to increase the video range in XOSDV2 transmitters (or similar XOSD models).

Ranges from 80 to 100Km with an omnidirectional 5dBi antenna on the plane or Drone and 24dBi (ANT24G24DB) on the ground.

Improve the power of your XOSD2 from 0.5W (+ 27dBm) to 4W (+ 36dBm).

Attention: It isn't valid for Wifi. Before using BOOST24G4W, check the regulations of your country. Not for use in UE.


    • Voltage: 12V. Min 10,8V. Max 13,5Vcc.
    • Direct power: with LiPo of 3 cells / 11,1V, or power from a DCDC ajusted to 12Vdc/2A.
    • Consumption: Stand by 250mA. Active @12V, @4W(RF) 1,43A. 
    • 1 Blue Led: Stand by.
    • 1 Green Led: Activated Booster.
    • 1 Input: TX input (SMA-Female), max. input power 500mW(+27dBm).
    • 1 Output: Antenna output (SMA-Female).
    • Maximum Range: 80-100Km, with 5dBi omnidirectional antenna on Plane/Drone and 24dBi on the ground.
    • Frequency: 2.4Ghz.
    • Frequency Range: 2370-2510Mhz.
    • Power: 4W. 
    • Working Temperature: Top 42ºC, Bottom 51ºC.
    • Ambient Temperature: -10ºC to 45ºC.













  • XOSDV2_Datasheet  RXVID2-1C_Datasheet  BOOST24G4W_Datasheet_mini_1





  • Aplicación




  • Video Transmitter + OSD: 
    • 1-XOSDV2. OSD + Video TX 2.4Ghz 500mW.
  • Video Receiver:
  • Video Booster: 
  • Antennas: ​​
  • Accessories:
    • 1- LAT1M_SMAH/SMAM. Cable SMA-Female to SMA-Male, 500mm. 
    • 1- LAT2MSMAFNM. Cable SMA-Male to Connector N-male, 300mm.
    • 1- LAT15_SMAH/MMCXM. Cable SMA-Female to MMCX-Male, 150mm. 
    • 1- CABLE_PX4_XOSD. Cable Pixhawk for XOSD. 
    • 1- CABLE_SERVO_HH. Cable Servo RC Female to Female.  
    • 1- CABLE_USB/MICROUSB. Cable USB-A Male to Micro USB-B Male, 2m.
    • 1- CABLE_JRCACable Audio Stereo MiniJack 3.5M to RCA Male.
    • 1- CSMAH/SMAM. Connector SMA-Female to SMA-Male. (Optional, only if you have selected BOOST24G4W).
    • 1- Jumpers.
    • 1- Fuse 2A.
    • 1- Suitcase key.


* The images shown on this page are only referential and may differ from the final products.

* This page shows the description of all products and options that can be selected in the XVID2, the contents of the Kit will vary depending on the options selected.

* Note: Tripod not included.


Additional product information

Antenna Video Receiver By default ANTPLA24G17DB. Antenna Planar 2.4Ghz 17dBi.
Video Booster No (0€)

We also recommend

Prices without VAT or delivery